The 4-Channel Gigabit PoE+ Injector allows users to add PoE+ power to a non-PoE switch. Connect the 4-port PoE+ injector to a non-PoE Gigabit switch, and then run Ethernet cables up to 100 meters (328 ft.) to network four PoE devices. This multi-port gigabit PoE+ injector supplies up to 30W of power to four PoE or PoE+ devices. The fanless design on the 4-port PoE+ injector conveniently eliminates operating noise and lowers energy consumption.
| Port | 4*RJ45*10/100/1000M Data IN |
|---|---|
| Pass Through Data Rates | 10/100/1000 Mbps |
| Power over Ethernet Output | Pin Assignment and Polarity: 3/6 (+), 1/2 (-) |
| Input Power Requirements | AC Input Voltage: 100 to 240 Vac |
| Dimensions | 150mmx65mmx38mm |
| Indicators | System Indicator: AC Power |
| Connectors | Shielded RJ-45, EIA 568A and 568B |
| Environmental Conditions | Operating Ambient Temperature:-10 to 45℃ |
| Reliability | MTBF: 100,000 hrs. @25℃ |
| Regulatory Compliance | IEEE 802.3af (PoE), IEEE 802.3at/bt (PoE+/PoE++) |
| Electromagnetic Emission & Immunity | FCC Part15, Class B |
| Surge Protection | AC port: 6kV |
| Safety Approvals | UL/cUL Per EN 6095-1 |
Related products
-
POE Injector and Splitter
Gigabit PoE to USB C and USB-A Converter POE to Type C Driver 10/100/1000Mbps
-
POE Injector and Splitter
Gigabit PoE to USB C Converter POE to Type C Driver 20V Output 10/100/1000Mbps
-
POE Injector and Splitter
Single Port 1/2.5/5/10G Multi-Gigabit PoE++ Injector, PoE Port @ 90W
-
POE Injector and Splitter
Single Port 10/100/1000M/2.5G Gigabit PoE Injector, PoE Port @ 30W
